GV Flat Die Thread Rollers

GV_series

AC inverter with jog capability
Roll out coolant tank
Push button control to raise & lower feed rails

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Min Diameter		mm
Max Diameter		mm
Min Length		mm
Max Length		mm
Waterbury Die Size
Power		kw
Min Speed		ppm
Max Speed		ppm
Weight		kg

CH Series Heading Machine

ch_series

Open Knife Cut-off
Drum Type Air Brake
Shihlin PLC

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Imperial Size Reference
Max Heading Diameter		mm
Max Cut-off Length		mm
Max K.O. Length		mm
P.K.O. Stroke		mm
Main Motor Power		hp
Max Speed		ppm
Weight		kg

Multi-headed Weighing Machine

multihead_weigh_top

Continuous weighing
Vibratory mounted cones on top
Large weighing buckets made from 2 mm stainless steel

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Weighing Channels
Pan Size		L
Load Cells		kg
Max Portion Size Per Head		kg
Max Total Portion Size		kg
Max Portions Per Minute
Max Product Length		mm
Max Product Flow		kgpm
Machine Diameter		mm
Top Cone Diameter		mm
Feed Tray Width		mm

CNH-6L

cnh_series

Bushing Cutoff
Pneumatic transfer
Synchronous PKO

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Min Diameter	3	mm
Max Diameter	6.35	mm
Max Cut-off Length	89	mm
Min shank length	8	mm
Max shank length	64	mm
Max tonnage	25
Main Drive	7.5	hp
PKO Stroke	21	mm
Weight	2,800	kg

CBF Series Cold Former

CBP-multi-stage-former-1

Built from gray cast iron
Hardened alloy steel plate design
Pneumatic transfer design

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Number of Stations
Imperial Size Reference
Max Wire Diameter		mm
Max Cutoff Length		mm
Max Knockout Length		mm
P.K.O. Stroke		mm
Max Forging Tonnage
Main Motor Power		hp
Max Speed		ppm
Weight		kg

CBP Series Cold Former

CBF_CBP_CNF_CNP_series

Built from gray cast iron
Hardened alloy steel plate design
Pneumatic transfer design

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Number of Stations
Imperial Size Reference
Max Wire Diameter		mm
Max Cutoff Length		mm
Max Knockout Length		mm
P.K.O. Stroke		mm
Max Forging Tonnage
Main Motor Power		hp
Max Speed		ppm
Weight		kg

CNP Series Cold Former

CBF_CBP_CNF_CNP_series

Built from gray cast iron
Hardened alloy steel plate design
Pneumatic transfer design

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Number of Stations
Imperial Size Reference
Max Wire Diameter		mm
Max Cutoff Length		mm
Max Knockout Length		mm
P.K.O. Stroke		mm
Max Forging Tonnage
Main Motor Power		hp
Max Speed		ppm
Weight		kg

CNF Series Nut Former

CBP-multi-stage-former-1

Built from gray cast iron
Hardened alloy steel plate design
Pneumatic transfer design

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Number of Stations
Max Wire Diameter		mm
Max Cutoff Length		mm
Max Knockout Length		mm
Max Forging Tonnage
Main Motor Power		hp
Max Speed		ppm
Weight		kg

TRG Series ThreadGard

Job recipe storage
7-inch multifunction touch screen
Interactive signature analysis

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Power Requirements	100-240 VAC
Input Contacts	2 Solid State: 10-30 VDC
Response Time	up to 10,000 samples per channel
Operating Speed	6-700 strokes per minute
Resolution	16 Bit

Loadgard PTM Series Process Monitor

KTM4500 OverlayL

2-6 Channel strain gauge inputs
10 inch multifunction touch screen display
Supports Piezo or Strain gauges

*Photo is a representation and may not reflect the final configured product.

View Products

Specification	Value	Units
Power Requirements	100-240
Input Contacts	2 Solid State: 10-30 VDC
Cam/Prox/PLC input	24 VDC
Response Time	6-700 strokes per minute
Response time	up to 10,000 samples per channel
Resolution	16 Bit

View All

1-Die 2-Blow Heading Machine

Flat Die Thread Rolling Machines

Multi-station Cold Former

Packaging Machines

Process Monitor

Wire Accessories

Secondary Operations

GV Flat Die Thread Rollers

CH Series Heading Machine

Multi-headed Weighing Machine

CNH-6L

CBF Series Cold Former

CBP Series Cold Former

CNP Series Cold Former

CNF Series Nut Former

TRG Series ThreadGard

Loadgard PTM Series Process Monitor